Garage Floor Coatings in Buffalo, NY
When it comes to garage floor coatings we’ve got your floor covered! We utilize only the best formulations of polyuria and Polyaspartic Polyurea Top coat floor coatings to make your floor look great and last!
About Our Garage Floor Coatings
When installing a residential garage floor in our Buffalo climate there are a lot of things that we need to consider when choosing a floor coating.
- Warm Weather
- Cold Weather
- Concrete Expansion/Contraction
- Road Salt/ Chemicals
- Ice and Snow
- UV Rays
- Physical Impacts
- Abrasion Resistance
- Household Chemical
Better Than Epoxy Flooring
We choose to use Polyureas throughout our whole floor coating system. Polyureas give you all of the needed characteristics to withstand our climate and much more!
*Pure Polyurea Base Coat
*Polyaspartic Polyurea Top Coat
- Polyureas are extremely flexible, in fact are 98% more flexible than typical Epoxy/Hybrid floor coatings. This flexibility is key during the summer to winter transition when the ground and concrete are freezing. During this time, the concrete is shifting and expanding which causes most floor coatings to fracture and crack. Polyureas, being as flexible as they are, expand and contract with the concrete leaving the surface strong and intact. Polyureas are also fully cured after 24 hrs. This does not allow the product to get harder or softer over time and with different temperatures. Epoxy floor coatings cure to 80% in 7 days and over the course of time cure the additional 20%. During this time the product continues to get harder and more brittle causing epoxies to eventually fracture and crack causing delamination.
- Polyureas are 4 X more abrasion resistant than epoxy/hybrid floor coatings. This is due to their extreme flexibility, elongation, dense cross-linking, and mar resistance. Polyureas can take a tremendous amount of abuse because they are malleable and can take the physical impacts and disperse them, much like the rubber on a car tire.
- As well as being flexible and abrasion resistant, polyureas are more chemically resistant to a much wider range of chemicals than epoxy flooring surfaces. This is due to their densely cross-linked chemistry. From Salt, Oil, Gas, and Grease, to Acids, Skydrol, and Hydroxides Polyureas will withstand a wide range of chemicals including salt, oil, gas, grease, skydrol and acids that you may use in your garage.
- Polyureas have 2 X the adhesion over typical epoxy/hybrid floor coatings. Polyureas are commonly associated with spray on liners in pickup trucks. Polyureas are made from the same materials only reformulated for concrete. In a spray application, the product is cured within 17 seconds and has an eternal bond to the substrate. This same chemistry is used in our floor coating product but slowed down to an hour cure time. This gives the product time to penetrate into the concrete deeply and bond molecularly into the concrete.
- Polyureas are 100% UV stable. UV stability is very important if you want your finish to look great and last! You will never see a difference in color with areas that are exposed to UV rays. These areas could include windows, doors, garage doors, and the portion of the floor that sticks beyond the garage door and is exposed to light every day! The UV stability of our product is backed by a written lifetime warranty
Standard Chip Color Chart
Stoney Creek ¼”